Remotely Operated Underwater Vehicle with Robotic Gripper

Authors

  • Huzefa Juzer

DOI:

https://doi.org/10.33317/ssurj.200

Keywords:

Remotely Operated Underwater Vehicle (ROV), MATLAB, Pulse Width Modulation (PWM), Image Processing, Robotic Arm

Abstract

This paper has been endeavoring to enforce modern technique in the field of electronics. It is focused on a 6Degree of Freedom (DOF) and an under actuated system. For the underwater controlling and modeling of the vehicle, it has used an Internet Protocol (IP) camera for underwater surveillance. The most important task which the project will do is that it has an image processing feature that will enable the vehicle to find and detect lost or floating objects and picked it out through robotic arm. The Sonar sensor shows the depth of the vehicle and the distance from objects and the barometer shows the surrounding pressure, temperature and altitude of the vehicle. The real time controlling is carried out with the prototype and the results shows that the system is fully capable of accomplishing tasks such as wireless communication, object detection, object recovery and can detect major environmental changes such as pressure, temperature, obstacle avoidance and other real time information processing effectively and efficiently. This report has been so devised to be of special value to research organizations. It introduces a model for simulation and control purpose. The Remotely Operated Underwater Vehicles (ROVs) are remote control underwater robots, driven by an individual on the surface. The whole system model is discussed and finally the results are conveyed.

Downloads

Published

2020-06-02

How to Cite

Juzer, H. (2020). Remotely Operated Underwater Vehicle with Robotic Gripper. Sir Syed University Research Journal of Engineering & Technology, 9(2). https://doi.org/10.33317/ssurj.200