Recycle Demolish Structure Concrete as Coarse Aggregate in Concrete with Incorporation of Glass Fiber

Authors

  • Safdar Iqbal SDO

DOI:

https://doi.org/10.33317/ssurj.288

Abstract

Waste recycling is an option to mitigate the environmental impact resulting from the significant amount of debris generated by the productive activities of the construction. Thus, the aim of the research work to evaluate the use of Recycled Coarse aggregates (RCA) instead of natural coarse aggregate (NCA) in concrete ingredients with 30 MPa compressive strength. The experimental program began with the physical and particle size characterization of the Recycled Coarse aggregates (RCA), and subsequent comparison with the properties of the natural coarse aggregate (NCA). Based on the knowledge of these properties, the production stage began of concretes. Different procedures and literature have been studied in order to achieve the strength of concrete up to 30Mpa by incorporated glass fiber (2 % by addition of cement). It was also the influence of the use of different contents (0, 10%, 20%, 50%, and 100%) of Substitution of natural coarse aggregate by the recycled coarse concrete aggregate in the properties of the fresh and hardened state of concrete. Regarding the strength, parameters increased gradually proportional to the amount of RCA in the concrete from 10 to 20% and decrease strength to the amount of RCA in the concrete from 50 to 100% Substitution of natural coarse aggregate (NCA) in concrete

References

Denzer, M., Muenzl, N., Sonnabend, F. A., & Haghsheno, S. (2015, July). Analysis of definitions and quantification

of waste in construction. In Proceedings of the 23rd Annual Conference of the International Group for Lean Construction, Perth, Australia (pp. 723-732).

Lu, W., Webster, C., Peng, Y., Chen, X., & Zhang, X. (2017). Estimating and calibrating the amount of building-related construction and demolition waste in urban China. International Journal of Construction Management, 17(1), 13-24.

Anshassi, M., Laux, S. J., & Townsend, T. G. (2019). Approaches to integrate sustainable materials management into waste management planning and policy. Resources, Conservation and Recycling, 148, 55-66.

Villoria Sáez, P., del Río Merino, M., Sorrentino, M., Porras Amores, C., Santa Cruz Astorqui, J., & Vinas Arrebola, C. (2020). Mechanical Characterization of Gypsum Composites Containing Inert and Insulation Materials from Construction and Demolition Waste and Further Application as A Gypsum Block. Materials, 13(1), 193.

Iqbal, K & Baig, M. A. (2016). Quantitative and Qualitative Estimation of Construction Waste Material in Punjab Province of Pakistan. Am. J. Agric. Environ. Sci, vol. 16, no. 4, pp. 770–779.

Abonyi, M. N., Aniagor, C. O., & Menkiti, M. C. (2019). Effective dephenolation of effluent from petroleum industry using ionic-liquid-induced hybrid adsorbent. Arabian Journal for Science and Engineering, 44(12), 10017-10029.

Tam, V. W., Soomro, M., & Evangelista, A. C. J. (2018). A review of recycled aggregate in concrete applications (2000–2017). Construction and Building Materials, 172, 272-292.

Caijun, S., Yake, L., Jiake, Z., Wengui, L., Linlin, C., & Zhaobin, X. (2016). Performance enhancement of recycled concrete aggregate. A Review Journal of Cleaner Production, 112, 466-472.

Memon, B. A. (2016). Recent development on use of demolished concrete as coarse aggregates. International Journal of Emerging Technology and Innovative Engineering, 2(1), 1-11.

Zhang, H., Zhao, Y., Meng, T., & Shah, S. P. (2016). Surface treatment on recycled coarse aggregates with nanomaterials. Journal of Materials in Civil Engineering, 28(2), 04015094.

Korai, M. S., Mahar, R. B., & Uqaili, M. A. (2017). The feasibility of municipal solid waste for energy generation and its existing management practices in Pakistan. Renewable and Sustainable Energy Reviews, 72, 338-353.

Dawn.com. (2018, September). More illegal structures pulled down. Retrieved from https://www.dawn.com/news/1432136

Dawn.com. (2018, September). CDA demolishes over a dozen buildings in grand anti-encroachment operation. Retrieved from https://www.dawn.com/news/1431784

Ayeleru, O. O., Dlova, S., Akinribide, O. J., Ntuli, F., Kupolati, W. K., Marina, P. F., ... & Olubambi, P. A. (2020). Challenges of plastic waste generation and management in sub-Saharan Africa: A review. Waste Management, 110, 24-42.

Kolekar, K. A., Hazra, T., & Chakrabarty, S. N. (2016). A review on prediction of municipal solid waste generation models. Procedia Environmental Sciences, 35, 238-244.

Silva, R. V., De Brito, J., & Dhir, R. K. (2019). Use of recycled aggregates arising from construction and demolition waste in new construction applications. Journal of Cleaner Production, 236, 117629.

Umar, U. A., Shafiq, N., Malakahmad, A., Nuruddin, M. F., & Khamidi, M. F. (2017). A review on adoption of novel techniques in construction waste management and policy. Journal of Material Cycles and Waste Management, 19(4), 1361-1373.

Frangipane, A. (2016). From spolia to recycling: the reuse of traditional construction materials in built heritage and its role in sustainability today: a review. Geological Society, London, Special Publications, 416(1), 23-33.

Song, Q., Li, J., Liu, L., Dong, Q., Yang, J., Liang, Y., & Zhang, C. (2016). Measuring the generation and management status of waste office equipment in China: a case study of waste printers. Journal of Cleaner Production, 112, 4461-4468.

Bing, X., Bloemhof, J. M., Ramos, T. R. P., Barbosa-Povoa, A. P., Wong, C. Y., & van der Vorst, J. G. (2016). Research challenges in municipal solid waste logistics management. Waste management, 48, 584-592.

Thakur, V., & Ramesh, A. (2015). Healthcare waste management research: A structured analysis and review (2005–2014). Waste Management & Research, 33(10), 855-870.

Sajid, M., Syed, J. H., Iqbal, M., Abbas, Z., Hussain, I., & Baig, M. A. (2019). Assessing the generation, recycling and disposal practices of electronic/electrical-waste (E-Waste) from major cities in Pakistan. Waste management, 84, 394-401.

Manfredi, S., & Pant, R. (2013). Improving the environmental performance of bio-waste management with life cycle thinking (LCT) and life cycle assessment (LCA). The International Journal of Life Cycle Assessment, 18(1), 285-291.

Gálvez-Martos, J. L., Styles, D., Schoenberger, H., & Zeschmar-Lahl, B. (2018). Construction and demolition waste best management practice in Europe. Resources, Conservation and Recycling, 136, 166-178.

Oldenziel, R., & Weber, H. (2013). Introduction: Recycling Reconsidered. Contemporary European History, 22(3), 347-370.

Pagliaro, M., & Meneguzzo, F. Lithium battery reusing and recycling: a circular economy insight. Heliyon. 5, e01866 (2019).

Abdel-Shafy, H. I., & Mansour, M. S. (2018). Solid waste issue: sources, composition, disposal, recycling, and valorization. Egypt J Petrol 27 (4): 1275–1290.

Kazemi, K. A. (2012). Properties of concretes produced with recycled concrete aggregates (Doctoral dissertation, Eastern Mediterranean University (EMU)).

Vázquez, E. (2013). Overview regarding construction and demolition waste in several countries. In Progress of Recycling in the Built Environment (pp. 37-173). Springer, Dordrecht.

Contreras, M., Teixeira, S. R., Lucas, M. C., Lima, L. C. N., Cardoso, D. S. L., Da Silva, G. A. C., ... & Dos Santos, A. (2016). Recycling of construction and demolition waste for producing new construction material (Brazil case-study). Construction and Building Materials, 123, 594-600.

Vieira, C. S., & Pereira, P. M. (2015). Use of recycled construction and demolition materials in geotechnical applications: A review. Resources, Conservation and Recycling, 103, 192-204.

Arulrajah, A., Yaghoubi, E., Wong, Y. C., & Horpibulsuk, S. (2017). Recycled plastic granules and demolition wastes as construction materials: Resilient moduli and strength characteristics. Construction and building materials, 147, 639-647.

Tam, V. W. (2009). Comparing the implementation of concrete recycling in the Australian and Japanese construction industries. Journal of Cleaner Production, 17(7), 688-702.

De Brito, J., Agrela, F., & Silva, R. V. (2019). Construction and demolition waste. In New Trends in Eco-efficient and Recycled Concrete (pp. 1-22). Woodhead Publishing.

Smirnova, O. (2017, January). Perspectives of flax processing wastes in building materials production. In AIP Conference Proceedings (Vol. 1800, No. 1, p. 020007).

Cheng, Z., Guo, Z., Tan, Z., Yang, J., & Wang, Q. (2019). Waste heat recovery from high-temperature solid granular materials: Energy challenges and opportunities. Renewable and Sustainable Energy Reviews, 116, 109428.

Qamar, N., & Khurram, A. A. (2018). Tackling Demolition Waste–An en route to Sustainable Development. Sir Syed University Research Journal of Engineering & Technology, 8(1), 8-8.

Abbas, A., Ahmad, I., Khan, F. A., & Badrashi, Y. I. (2020). A Suitability of Waste Poly-Vinyl-Chloride (PVC) Pipes as a Modifier in the Construction of Pavements in Hot Climates: Suitability of waste PVC pipes in HMA. Sir Syed University Research Journal of Engineering & Technology, 10(2).

Downloads

Published

2021-12-06

How to Cite

Iqbal, S. (2021). Recycle Demolish Structure Concrete as Coarse Aggregate in Concrete with Incorporation of Glass Fiber. Sir Syed University Research Journal of Engineering & Technology, 11(2). https://doi.org/10.33317/ssurj.288